Telephone +44 (0)1782 393843
Aim MXS Strada Motorcycle Dash Display

Aim MXS Strada Motorcycle Dash Display

The New Generation Compact Motorcycle TFT Dash

The Aim MXS Strada Motorcycle Dash Display is the evolution of the earlier MXL Strada. It is one of the most widely-spread dashes on tracks and streets all over the world. The MXS Strada is a 5″ color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and – optionally – the GPS Module. Its data sampling capability can also be incremented adding up to eight expansion modules.

MXS Strada ECU Connection

Aim systems acquire data from the ECU of your motorcycle . The list of available ECU drivers is constantly updated and upgraded on our support site and are published here. The support site includes over 1,000 different ECU’s both Stock and Racing. They are sorted by manufacturer/bike model and for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, Aim systems manage the following data lines:

  • CAN
  • RS232
  • K-Line
Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded and is published here: it includes over 1,000 different ECU’s, either Stock and Racing.

MXS Strada Analog Digital Inputs

Aim systems also feature digital inputs:

  • Speed signals – From the ECU, from the GPS and from the wheel sensors.
  • RPM – From the ECU or from a digital input connected to a square wave signal (8 to 50 V) or to a low voltage (from 150 to 400 V) of the coil.
  • Lap signal – Lap and split times are sampled by the GPS or via optical receiver/transmitter.
Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers is constantly updated and upgraded and is published here: it includes over 1,000 different ECU’s, either Stock and Racing.

MXS Strada Second CAN

An innovative MXS Strada feature is its CAN2 line, managing data coming from your additional modules (i.e. ABS, traction control, infrared temperature sensors and more.

This feature meets the requirements of a growing number of race drivers as the use of additional modules is becoming quite common in a number of race series.

MXS Dash Display Second CAN

MXS Strada Math Channels

Aim systems gives you Math Channels values straight away and the dash logger can be configured to display those values (i.e. brake bias, calculated gear) all in real time.

With AiM systems you immediately get Math Channels values: the dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

High Contrast TFT Display

The Aim MXS Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. You can choose the custom pages you wish, including up to four additional fields

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the pushbuttons provided.

With AiM systems you immediately get Math Channels values: the dash logger can be configured to display those values (i.e. brake bias, calculated gear) in real time.

Watch Your Data in Pre-Configured Pages

The MXS Strada has a high contrast TFT display and its visual quality is always optimal, as its ambient light sensor keeps the backlight at the best brightness levels. The dash is available in the “Street Icons” version needed by street riders (fuel, oil, water temp etc.)

MXS Strada shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, laptimes and much more

Flexible Shift Lights and Alarms

The ten multicolored RGB shift lights on the MXS Strada can be customized to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. You can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions and colors and you can select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

The ten multicolored RGB shift lights can be customized to your liking, defining the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs: you can configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of motorcycle control possibilities.

Digital Output

MXS Strada features a 1 amp digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU. This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps etc. when a certain event happens.

More info

Expand the system according to your needs

GPS08 Module

GPS Module

Thanks to optional GPS08 Module and the GPS Manager software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique

Channel Expansion It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One Lambda Controller

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Race Studio 3

download race studio 3

Race Studio 3

MXS Strada is to be configured via Race Studio3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.