The EVO4s Motorcycle Data Logger is the new powerful and flexible data logger, an evolution of the well known EVO4. It maintains the same one connector per channel connection logic, but with a completely redesigned internal electronic board. Aim EVO4s is fully compatible with the last generation of Aim dash/displays and with the new powerful Race Studio 3 software.
A wide range of sources for your data
The EVO4s Motorcycle Data Logger samples all the information you need via data coming from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro, from the GPS08 module included in the kit. From analogue / digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 5 configurable analogue channels, to the RPM input and to 2 wheel speed inputs.
Aim systems acquire data from the ECU of your vehicle. The list of available ECU drivers, constantly updated and upgraded, is published here. Our Support area includes over 1,000 different ECU’s, either Stock and Racing. They are sorted by manufacturer/vehicle model: for each ECU you find the proprietary communication protocols, including the standard OBDII ones. From a hardware point of view, Aim systems manage the following data lines:
GPS technology represents a true revolution in racing data acquisition. Now, thanks to GPS08 Module and Race Studio 3 software, as soon as you start your track session you can immediately sample lap and split times as well as speed, position and acceleration… all the information needed for engine tuning as well as for improving your driving technique.
GPS08 is more precise than most of the existing GPS systems, as it has been designed to add to the GPS satellite’s signal the Global Navigation Satellite (Glonass) system’s signal. With an average of almost twenty satellites working in conjunction, GPS08 guarantees a precision and a reliability simply not comparable to the old generation GPS systems
The GPS08 Module included in the EVO4s Motorcycle Data Logger kit, provides the following information, updated ten times per second:
- Position (latitude, longitude, altitude)
- Longitudinal acceleration
- Lateral acceleration
If EVO4s Motorcycle Data Logger knows the finish line of the track and the split coordinates, it can calculate and show:
- Lap Times
- Split times
Many sensors can be connected to EVO4s Motorcycle Data Logger via:
5 Analog channels with configurable 12 bit 0-5 Volt, 0-500 mV, 0-50 mV inputs or thermocouple input, used to sample data coming from temperature, pressure, suspension and other kinds of sensors.
2 Speed inputs, which allow to monitor the different wheels behavior.
1 RPM input, which manages square wave signals transmitted by the ECU, or pulse signals picked from the coil command (low voltage).
Internal three-axial accelerometer and gyro sensor
EVO4s Motorcycle Data Logger features a 1 amp at 12 volts digital output. You can configure it in order to turn it on or off depending on the value of the analogue or digital inputs, ECU values, expansion values, GPS information or math channels.
EVO4s Motorcycle CAN Output
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
Expand Your EVO4s Motorcycle CAN Output As Much As You Need
Best Way To See Data From Your EVO4s Motorcycle
Connect the EVO4S to the GS-Dash to see your data in real time
Race Studio 3
Race Studio 3 is the heart of your EVO4s Motorcycle data logger, managing all your racing activities. The Race Studio 3 can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.
Expand the EVO4s Motorcycle Data Logger System According To Your Needs
EVO4s – GPS Module
Thanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique
EVO4s – Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
EVO4s – TC Hub
It adds 4 K thermocouples.
EVO4s – LCU-One Lambda Controller
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.
SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.
Connection Kits for Sport Bikes
Aim Have designed specific applications to allow easy installation and connection of EVO4s on sports bikes. Installation kits for Ducati, Honda, Kawasaki, and Suzuki are currently available. More will follow.