The new powerful and flexible datalogger Aim EVO4S Motorcycle Racing Datalogger is the evolution of the well known EVO4. It maintains the same connection logic, one connector per channel, but with a completely redesigned internal electronic board, fully compatible with the last generation of Aim dashloggers and with the new powerful Race Studio 3 software.
A wide range of sources for your data
The GPS08 Module included in the EVO4S motorcyle kit, provides the following information, updated ten times per second:
- Position (latitude, longitude, altitude)
- Longitudinal acceleration
- Lateral acceleration
If Aim EVO4s Motorcycle Data Logger knows the finish line of the track and the split coordinates, it can calculate and show:
- Lap Times
- Split times
Many sensors can be connected to EVO4S via:
5 Analog channels with configurable 12 bit 0-5 Volt, 0-500 mV, 0-50 mV inputs or thermocouple input, used to sample data coming from temperature, pressure, suspension and other kinds of sensors.
2 Speed inputs, which allow to monitor the different wheels behavior.
1 RPM input, which manages square wave signals transmitted by the ECU, or pulse signals picked from the coil command (low voltage).
Internal three-axial accelerometer
and gyro sensor
EVO4S features a 1 amp at 12 volts digital output. You can configure it in order to turn it on or off depending on the value of the analog or digital inputs, ECU values, expansion values, GPS information or math channels. More info
A built-in inertial platform lets you have the most powerful system for understanding oversteering, understeering, banking, etc.
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
Race Studio 3
Expand the system according to your needs
Thanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
It adds 4 K thermocouples.
LCU-One Lambda Controller
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.
SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.
EVO4S with GPS08 1.3 m length cable – X61E4SGPS130
EVO4S with GPS08 4 m length cable – X61E4SGPS400
EVO4S with GPS08 Roof version 4 m length cable – X61E4SGPS4RF
Want to Buy the Aim EVO4s data Logger ?
FREE DELIVERY ~ 30 DAY RETURNS ~ GREAT SUPPORT!
“Get More Data, Win More Races”