Downhill Mountain Bike GPS Display Data Logger
Solo 2 DL, with ECU Connection
The Solo 2 DL Version
There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit providing you a lot of information with just one cable. Where your ECU protocol is not in the database, an ECU Driver Builder is always available in the Race Studio 3 configuration software which you will be able to create your protocol by yourself.
Coil RPM input
Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).
“the most precise and easy way to get lap times”
The new Aim Solo 2 track day racing lap timer receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.
Aim Solo 2 screen can be backlit in one of the seven available colors:
Find your track easily and quickly
Aim Solo 2 relies on a database of more than 2,000 tracks all over the world. As soon as it switches on, the Solo 2 identifies its position, recognises the starting line coordinates of the track and starts sampling lap times.
In the event that the track is not in the database, it’s no problem. The Aim Solo 2 realises it and switches to learning mode, automatically understands the characteristics of the track and gives the lap time anyway.
Even the Predictive Lap Time is Much More Reliable
Solo 2 Race Data Recall on Screen
At the end of your test, you can quickly review all the key information on your display.
Solo 2 Wi-Fi Communication with the PC
Wi-Fi connection is easy and fast without connectors or cables,
Simply the best way to configure your Solo 2, to manage the track database and to download the data to your PC.
SmartyCam HD connection
The perfect connection: get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.
In The Box
Solo 2 DL Downhill Mountain Bike GPS Display Data Logger
- Solo 2 DL,
- power cable with AC adapter,
- mounting bracket with screws,
- user manual,
- software installation CD,
- Aim sticker.
The cables you can choose are:
- CAN/K-Line/External power cable with OBDII connector
- CAN/RS232 external power cable
- RPM/External power cable (if your vehicle has no ECU)
Note: all cables are available in these four versions: Australian, UK, USA and European adaptor.
Display : Graphical
Display resolution : 238×99 pixels
Display pages : Up to 5 freely configurable
Backlight : 7 configurable RGB colors
Shift lights/alarm LEDs : 10 configurable RGB LEDs
Integrated track database : Yes
Inertial platform : Internal 3 axis ±5G accelerometer + 3 axis gyro + 3 axis magnetometer
Wi-Fi connection : Yes GPS : 10 Hz
External power : 12 V Memory : 4 GB
Battery type : Rechargeable Lithium
Pushbuttons : Metallic
Dimensions : 98.0×73.7×30.2 mm
Weight : 240 g, battery included
Waterproof : IP67
Solo 2 DL
ECU connection : CAN, RS232 or K-Line to 1,000 + industry leading ECUs
Solo 2 DL Drawing
Solo 2/Solo 2 DL can be installed using the following bracket kits:
SUPPORT FOR ROLL-BAR
Part number X46KSTG00
The kit contains: roll-bar bracket, 90 mm arm, clamp base with ball, locknut, 4.5 cm and 5.5 cm tube clamp.
SUPPORT FOR GENERIC TUBE, max 3 cm diameter
Part number X46KSTP00
The kit contains: 90 mm arm, clamp base with ball, locknut.
SUPPORT FOR SUCTION CUP
Part number X46KSVS00
The kit contains: suction cup, 90 mm arm, clamp base with ball, locknut.