
EVO5 Truck Racing Data Logger
The New Aim EVO 5 data logger, is the evolution of the traditional logger that over the years has become a standard de facto data acquisition system in a huge amount of racing championships. With its compact aluminum body, the Aim EVO 5 data logger can be easily placed in any vehicle. Its configuration with the new Race Studio 3 software is simple and immediate. Compatibility with Aim visors will come soon.
EVO5 samples all the data you need from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro also from the GPS08 Module included in the kit.
And from analog/digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 8 configurable analog channels, to the RPM input and to 4 wheel speed inputs.
Two Digital Outputs

EVO5 features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs.
They permit to automatically run external systems,i.e. to switch on/off additional lights, to activate/ de-activate a cooling fan or circulation pumps, etc. when a certain event happens
CAN Output
With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.
Internal SD card
The internal SD card permits to record all possible data you may ever need. The card is protected by a waterproof door equipped with a sensor closing all files when you open it, to prevent any data loss possibility.
No way to have a faster data downloading: you remove the SD and it is done! Of course a USB connection is available, too.
Wi-Fi Connection
Configure the system and download your data over a secure 802.11 WiFi connection, even if your car is 100 meters far from you.


Two multi-channel Motorsport connectors
Two multi-channel Motorsport connectors: simple and straightforward, one top quality harness for ALL your connections. A 37 pins connector for main applications (power, CAN, Aim CAN network, etc.) and a 22 pins connector for additional functions like CAN 2, digital outputs.

Expand the system according to your needs

It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

Thanks to the SD Card, Memory Module can record all your data in a file that can be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, can be connected via CAN-Bus to MXL2 and to all AiM loggers.

The on-board cameras that overlays on videos the data sampled by your logger.
Connection Example

Race Studio 3
Configuration
With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.


Analysis
With Race Studio 3 you can also analyse all data recorded by MXG and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.
A wide range of data sources

In The Box
- EVO5 Truck Racing Data Logger
- SD card
- harness
- GPS08 Module
- software
Technical Specs
External modules connection : GPS Module, Channel Expansion, TC Hub, Lambda controller, SmartyCam HD
Analog inputs : 8 fully configurable: 0-5V, 0-12V, K thermocouples. Max freq 1 KHz each
Digital inputs : Coil RPM and 4 speed inputs
Inertial platform : Internal 3 axis ±5G accelerometer + 3 axis gyro
Digital outputs : 2, up to 1 A each
Second CAN : Yes
Wi-Fi connection : Yes
Internal memory : 4 GB
SD card : Internal: up to 128 GB
Connectors : 2 Motorsport
Body : Anodized aluminum
LEDs : 1 system status
Dimensions : 114.4×47.2×58.8 mm
Weight : 300 g
Waterproof : IP65
Accessories
22 pins harness
Part number: V02586030
Download the tech sheet
37 pins harness with 1 thermocouple
Part number: V02586040
Download the tech sheet
37 pins harness with 2 thermocouples
Part number: V02586050
Download the tech sheet
SPARE PARTS
37 pins harness
Part number: V02586020
Download the tech sheet
GPS08 Module
More info
Downloads
Video
