Aim SOLO 2

“the most precise and easy way to get lap times”

The new Aim Solo 2 track day racing lap timer receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version. The power ON requires only a few seconds and the lap times are calculated with a max 2/100 sec of tolerance.

Aim Solo 2 screen can be backlit in one of the seven available colors:

Solo 2 & PistenClub e.V. @ Monza

Watch the movie on YouTube

Find your track easily and quickly

Aim Solo 2 relies on a database of more than 2,000 tracks all over the world. As soon as it switches on, the Solo 2 identifies its position, recognises the starting line coordinates of the track and starts sampling lap times.

In the event that the track is not in the database, it’s no problem. The Aim Solo 2 realises it and switches to learning mode, automatically understands the characteristics of the track and gives the lap time anyway.

Even the Predictive Lap Time is Much More Reliable

Solo 2 Race Mode Selection

Aim Solo 2 track day racing lap timer can manage different types of races, Speed races in a closed circuit, Point to-point races, Regularity, Performance tests (0-100 km/h etc.) In each of these configurations, Solo 2 gives you the correct information during the test and powerful data review immediately after each session.

Solo 2 Race Data Recall on Screen

At the end of your test, you can quickly review all the key information on your display.

Solo 2 Wi-Fi Communication with the PC

Wi-Fi connection is easy and fast without connectors or cables,
Simply the best way to configure your Solo 2, to manage the track database and to download the data to your PC.

Solo 2 DL, with ECU Connection

The Solo 2 DL Version
There is more than 1,000 protocols for over 1,000 ECU’s in the database to allow the Solo 2 DL easy connection to your Engine Control Unit providing you a lot of information with just one cable. Where your ECU protocol is not in the database, an ECU Driver Builder is always available in the Race Studio 3 configuration software which you will be able to create your protocol by yourself.

Coil RPM input
Solo 2 DL now features a digital input allowing to log RPM either from square wave signals (8-50 V each signal) or pulse signals (150-450 V ignition coil trigger – primary circuit).

SmartyCam HD connection

The perfect connection: get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.