Telephone +44 (0) 1782 393843
MXG Strada 1.2 Motorcycle Dash Display

MXG Strada 1.2 Motorcycle Dash Display

A wide range of data sources

MXG 1.2 Strada is a 7″ color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and optionally, the GPS08 Module.

Freely Configurable Pages

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two push buttons.

Freely Configurable Pages

High Contrast TFT Display

A high contrast TFT display identifies MXG 1.2 Strada at the first glance. An ambient light sensor keeps the back light at optimum brightness levels.

High Contrast TFT Display

Flexible Alarms & Custom Street Icons

MXG 1.2 Strada features eight configurable RGB alarm LED’s. You choose the conditions, you choose the colours. Select a solid alarm or flashing one and the flashing frequency. You can also choose to have an accompanying text message and set the alarm priorities. Furthermore, you can select the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management”. These can be set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customised icons.

Flexible Alarms & Custom Street Icons

Watch Your Data in Pre-Configured Pages

MXS Strada Preconfigured Pages

Aim MXS Strada 1.2 shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more.

You can choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the pushbuttons.

Two Digital Outputs

MXG 1.2 Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.

This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

MXS Strada Two Digital Outputs
Digital Output Pdf download

Camera inputs, also for Mirror Camera

Two analog camera inputs are available, to swap your display into a mirror camera, through push button command or event management.

Flexible Alarms & Custom Street Icons
Aim MXS Strada 1.2 shows, together with RPM scale, all the data you need

A Modular System

Using the built-in CAN bus you can add expansion modules to aquire and view all the data you need.

Expand the system according to your needs

GPS Module

Thanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique

Channel Expansion It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One Lambda Controller

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

Memory Module
Thanks to the SD Card, Memory Module can record all your data in a file that can be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, can be connected via CAN-Bus to MXL2 and to all AiM loggers.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

MXG 1.2 Strada Connection Examples

MXG 1.2 Strada Connection Examples

Integrated Shift Light Array

Choose from a host of advanced multi-coloured RGB shift light patterns that can be customised as you like, and for each unique gear when required.

Integrated Shift Light Array

Race Studio 3

Race Studio 3 is the heart of your MXS 1.2 Strada managing all your racing activities.

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

Race Studio 3
RS3 Analysis

Analysis

With Race Studio 3 you can also analyse all data recorded by MXG and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

A wide range of data sources

MXG Strada 1.2 is the dash logger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

           
In The Box
  • MXG Strada 1.2
  • USB cable
  • 14 pins standard wiring
  • 23 pins connector + contacts
  • software installation CD
Technical Specs

Display: 7” TFT
Resolution: 800×480 pixels
Contrast: 1000:1
Brightness: 700cd/m2 – 1,100 Lumen
Ambient light sensor: Yes
Alarm LEDs: 8 configurable RGB LEDs
Shift lights: 10 configurable RGB LEDs
CAN connections: 2
ECU connections: CAN, RS232 or K-Line
ECU compatibility: + 1,000 industry leading ECUs
Expansion CAN connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analog inputs: 8 fully configurable, max 1,000 Hz each
Digital inputs: 1 speed input, coil RPM input
Digital outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminum
Pushbuttons: Metallic
Connectors: 2 AMP connectors + 1 Binder connector
Power consumption: 400 mA
Dimensions: 237×127.6×26 mm
Weight: 950 g
Waterproof: IP65

pinout

Accessories

22 pins harness Part number: V02573020
Download the tech sheet

22 pins harness with 1 thermocouple Part number: V02573080
Download the tech sheet

22 pins harness with 2 thermocouples Part number: V02573160
Download the tech sheet

37 pins harness with 1 thermocouple Part number: V02573040
Download the tech sheet

37 pins harness with 2 thermocouples Part number: V02573050
Download the tech sheet

Remote buttons interface More info

22 pins female Deutsch connector Part number: 5CN822F00

37 pins female Deutsch connector Part number: 5CN837F00

SPARE PARTS

37 pins harness Part number: V02573010
Download the tech sheet

GPS08 Module More info

USB adapter Part number: V02573030
Download the tech sheet


USB cable Part number: X90TMPC002

Share and save this page