Aim MXG 1.3

Aim MXG 1. is the new dash logger designed to acquire and display data coming from your engine ECU, the internal accelerometer, gyro, and from the GPS Module included in the kit. Analog/digital inputs and predefined math channels.

Performance and data acquired can also be incremented adding up to eight expansion modules. The only difference between the  two is the MXS is a compact 5″ display and Aim MXG 1.3 is a 7″ display, a better fit for wide cockpit installations.

Freely Configurable Pages

You can define all the custom pages you wish, choosing among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages can be managed pushing one or two push buttons.

MXG Freely Configurable Pages

CAN Output

With the CAN Output you can send messages directly to an existing CAN network in order to improve the range of vehicle control possibilities.

MXG Wide Range of Data Sources

High Contrast 7″ TFT display

The Aim MXG 1.3 display features a high contrast 7″ TFT display, fully configurable by a dedicated software.
An ambient light sensor keeps the backlight at optimum brightness levels.

MXG High Contrast TFT Display

Flexible Alarms

Aim MXG 1.3 has Eight configurable RGB alarm LED’s. You choose the conditions, you choose the colours. Select a solid alarm or flashing one and the flashing frequency then choose to have an accompanying text message and set the alarm priorities.

MXG Flexible alarms
MXG Cockpit view

Two Digital Outputs

Aim MXG 1.3 features two digital outputsEach of them can give an output of 1 amp at 12 volts: they can be configured in order to be turned on/off depending on the value of the analogue or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

MXG Two Digital Outputs
MXG Two Digital Outputs

Camera inputs, also for mirror camera

Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

Camera inputs, also for mirror camera

Integrated Shift Light Array

Choose from a host of advanced multicoloured RGB shift light patterns that can be customised to your liking, and for each unique gear when required

Expand the system according to your needs

GPS Module

Thanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique

Channel Expansion It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One Lambda Controller

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

Memory Module
Thanks to the SD Card, Memory Module can record all your data in a file that can be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, can be connected via CAN-Bus to MXL2 and to all AiM loggers.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Connection Example

Race Studio 3

Race Studio 3 is the heart of your Aim MXG 1.3 managing all your racing activities.

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

Aim MXG Race Studio 3
MXG RS3 Analysis

Analysis

With Race Studio 3 you can also analyse all data recorded by Aim MXG 1.3 and downloaded to your PC. Graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

A wide range of data sources

Aim MXG 1.3 is the dash logger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

              
In The Box
  • Aim MXG 1.3
  • 37 pin standard harness
  • GPS Module with cable
  • USB cable,
  • Software installation CD
  • AiM Sticker

Technical Specs

Display : 7″ TFT
Resolution : 800×480 pixels
Contrast : 1,000:1
Brightness : 700cd/m2 – 1,100 Lumen
Ambient light sensor : Yes
Alarm LEDs : 8 RGB freely configurable
Shift lights : 10 integrated freely configurable RGB LEDs
CAN connections : 3
ECU connections : CAN, RS232 or K-Line
ECU compatibility : + 1,000 industry leading ECUs
Expansion CAN connection : GPS, Channel Expansion, Thermocouple Expansions, Lambda Controller, SmartyCam HD
Analog inputs : 8 fully configurable, max 1,000 Hz each
Digital inputs : 4 Speed inputs, lap signal, coil RPM input
Digital outputs : 2 (1 A max each)
Second CAN : Yes
Wi-Fi connection : Yes
Accelerometer : Internal Three-axial ± 5G + Three-axial Gyroscope+ 3 axis magnetometer
Internal memory : 4 GB
Body : Anodized Aluminum
Pushbuttons : Metallic
Connectors : 2 Motorsport connectors + 1 Binder connector
Power consumption : 400 mA
Dimensions : 237×127.6×26 mm
Weight : 950 g
Waterproof : IP65

Aim MXG 1.2 Technical 1a

Aim MXG 1.2 Technical 1

Aim MXG 1.2 Technical 2

Accessories

22 pins harness
Part number: V02573020
Download the tech sheet

22 pins harness with 1 thermocouple
Part number: V02573080
Download the tech sheet

22 pins harness with 2 thermocouples
Part number: V02573160
Download the tech sheet

37 pins harness with 1 thermocouple
Part number: V02573040
Download the tech sheet

37 pins harness with 2 thermocouples
Part number: V02573050
Download the tech sheet

Remote buttons interface
More info

22 pins female Deutsch connector
Part number: 5CN822F00

37 pins female Deutsch connector
Part number: 5CN837F00

SPARE PARTS

37 pins harness
Part number: V02573010
Download the tech sheet

GPS08 Module
More info

USB adapter
Part number: V02573030
Download the tech sheet

USB cable
Part number: X90TMPC002

Technologies

Aim Shop

Services

Support