Aim MXS Strada 1.3

A wide range of data sources

Aim MXS Strada 1.3 is the the evolution of previous MXS Strada which is a 5″ color display with great visual impact. It is configurable to show lap times and all the info coming from the Engine Control Unit like analog/digital inputs, pre-defined math channels and optionally, the GPS08 Module.

Aim MXS Strada 1.3 is available in two versions:

Watch Your Data in Pre-Configured Pages

Aim MXS Strada 1.3 shows, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more.

Choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the pushbuttons.

High Contrast TFT Display

The Aim MXS Strada shows with RPM scale, all the data you need, like speed, water temperature and oil pressure, lap times and much more. Choose the custom pages you wish, including up to four additional fields.

A wide library of page styles, defining which data to be shown, their end of scale and measured units. Swapping between pages is quite easy with the Aim MXS Strada using the pushbuttons provided.

Flexible Shift Lights and Alarms

The ten multi-colored RGB shift lights on the Aim MXS Strada may be customised to your liking to define the RPM threshold for each single gear. The same flexibility applies to the configurable RGB alarm LEDs. Configure them in order to turn them on/off depending on analog or digital inputs, ECU values, expansion values, math channels or, optionally, GPS information. You choose conditions, colours and you select a solid alarm or flashing one and the flashing frequency. It is also possible to configure an accompanying text message along with the alarm priorities.

Two Digital Outputs

The AimMXS Strada features a LOW SIDE type (switch to ground) digital output configurable in order to be activated/deactivated depending on the value of the analog/digital inputs or on impulses coming from the ECU.

This permits to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.

Camera inputs, also for mirror camera

Two analog camera inputs are available, to swap your display into a mirror camera, through pushbutton command or event management.

Expand the system according to your needs

GPS Module

Thanks to GPS05 Module (included in the kit) and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One Lambda Controller

Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data, lambda value and exhaust gas temperature, allows to perfectly tune the carburetion.

Memory Module
Thanks to the SD Card, Memory Module records all your data in a file that to be downloaded on your PC for post-analysis. Memory Module, with 16Gb capability, also be connected via CAN-Bus to MXL2 and to all Aim loggers.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Aim MXS Strada Connection Examples

Race Studio 3

Race Studio 3 is the heart of your Aim MXS Strada 1.3 managing all your racing activities.

MXS Strada Configuration

With Race Studio 3 you will be able to create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

MXS Strada Analysis

With Race Studio 3, analyse all data recorded by MXG and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

Download RS3

A wide range of data sources

Aim MXS Strada 1.3 is the dash logger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7″ display makes it perfect for wide cockpits installation.

In The Box

MXS Strada 1.3
USB cable
14 pins standard wiring
23 pins connector + contacts
software installation CD
AiM Sticker

MXS Strada Technical Specs

AiM MXG 1.3 Strada 7″ TFT Dash Display with Race Icons
Display: 7″ TFT
Resolution: 800 x 480 pixels
Contrast: 1000:1
Brightness: 700cd/m2 – 1,100 Lumen
Ambient Light Sensor: Yes
Alarm LEDs: 8 configurable RGB LEDs
Shift Lights: 10 configurable RGB LEDs
CAN Connections: 2
ECU Connections: CAN, RS232 or K-Line
ECU Compatibility: +1000 industry-leading ECUs
Expansion CAN Connection: GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD
Analogue Inputs: 8 fully configurable, max 1000 Hz each
Digital Inputs: 1-speed input, coil RPM input
Digital Outputs: 1 (1 A max)
Second CAN: Yes
Body: Anodized Aluminium
Pushbuttons: Metallic
Connectors: 2 AMP connectors + 1 Binder connector
Power Consumption: 400 mA
Dimensions: 237 X 127.6 X 26mm
Weight: 950g
Waterproof: IP65 stradachoice pinout